Safety Information

Warning

1.If you find the package is damaged, or some part in the package is

damaged, please do not install and use this product, it may cause some

unknown issue, please contact with our customer service team via

amazon message or email immediately.

2.These lights working voltage is 12V, don't be powered with higher

voltage, it will cause the product damaged and make some safety

problem.

3.Don't expose unused connectors without any protection, exposed

connectors may touch your board and make short-out.

Normal use, you need connect y spliter with two led strip lights via two male

4-pin connectors. It will be safe in normal use, also our led controller have

built-in pptc resettable fuses, it will strengthen the protection of the whole

circuit.

But some customers connect y spliter with two male 4-pin connectors, but just

connect one led strip light, the other end of the y spliter male connector is

exposed without any protection, the unused male connector may cause board

short-out.

PAGE 1
Warning 1.If you find the package is damaged, or some part in the package is damaged, please do not install and use this product, it may cause some unknown issue, please contact with our customer service team via amazon message or email immediately. 2.These lights working voltage is 12V, don't be powered with higher voltage, it will cause the product damaged and make some safety problem. 3.Don't expose unused connectors without any protection, exposed connectors may touch your board and make short-out.