ENGLISH PORTABLE DVD PLAYER Please read this manual before operating OWNER`S MANUAL
Table of Contents Table of Contents.....................................................................................................................................................................1 Safety Information...................................................................................................................................................................2 Remote Control.................................................................................................................
Safety Information Please read all of the safety and operating instructions before operating this Player, follow all warnings placed on the Player and in the user's manual. These safety and operating instructions should be retained for future reference. Safety Information Do not expose the system to excessive moisture, rain, sand, or heat sources. Place the DVD Player on a firm, flat surface. Keep the DVD Player away from domestic heating equipment and direct sunlight.
Remote Control Remote Control 14 1 15 2 16 3 17 4 18 5 6 7 19 8 20 9 21 22 10 23 11 24 12 25 13 1. MENU/PBC Button Brings up the disc menu. 2. L/R Button Selects left, right and stereo sound tracks. 3. P/N Button Selects PAL/NTSC/AUTO TV systems. 4. TITLE Button 5. SUBTITLE Button Selects the subtitle's language. 6. Number Buttons (0,1,...,9) 7. SETUP Button Brings up the setup MENU to set up the system's language, display,password etc. 8. (PLAY/ENTER)/DIRECTION Buttons 9.
Description Right View Front View 1 2 12 13 14 15 16 17 1. LCD 2. DISC COVER 3 . UP 4 . RIGHT 5 . DOWN 6 . MENU 7 . SETUP 8 . DVD/USB 9. STOP 10. SKIP-FORWARD 11. FAST FORWARD 12. LEFT 13 .ENTER 14. FAST REVERSE 15. PLAY/PAUSE 16. SKIP-PREVIOUS 17. OPEN 3 4 5 6 7 8 9 10 11 7 6 5 4 3 1 2 1. EARPHONE / SPEAKER VOLUME 2. EARPHONE JACK 3. AUDIO OUTPUT 4. AUDIO OUTPUT 5. VIDEO OUTPUT 6. POWER ON/OFF 7. DC IN 12V Bottom View Left View 3 1 2 3 2 1.OPEN 2.LED LIGHT 3.REMOTE CONTROL SENSOR 1 1.
Using the Remote Control Installing the battery Using the remote control 1. Open the battery compartment cover using a coin. Point the remote control directly at the remote sensor on the front of the DVD Player. 2. Insert a 3V lithium battery into the battery compartment with the polarity ( + ) facing up as marked. Battery 3. Replace the battery compartment cover and turn clockwise until it stops.
Connecting Earphones (Optional Accessory) You can attach an earphone with a stereo mini-jack plug to the phone jack ( ) for private listening. The volume can be adjusted using VOL + and VOL - on the remote control or using the VOLUME control dial on the Player. Note: When the earphone is connected to the Phone Jack ( ), the speaker will be disconnected.
Revolving the Screen 1.Open the screen cover to a vertical position. 2.Revolving the screen horizontally around it's axis in CLOCKWISE direction. The maximum revolving degree is 180.(If you want to return to initial position, revolve the screen counterclockwise). 3.Fold down the screen.
Connecting to a TV You can enjoy DVD quality video on TV screen. 1. Turn off DVD player and other components. 2. Connect the audio and video cables as illustrated below. 3.Turn on power. 4.Repeatedly press TV/Video button on your TV to select the input from the DVD player. Connect to a TV equipped with external connection jacks AUDIO IN R Audio(left):White Audio(right):Red VIDEO OUTPUT AUDIO OUTPUT(R) AUDIO OUTPUT(L) TIPS If you wish to view video on your TV only, close the display panel of your Player.
Using USB Port The Player accepts most USB devices such as MP3, DSC, USB- drive, Digital Camcorder etc. The USB in this Player supports version 1.1/2.0. USB slot Connecting a USB device 1. Plug in the USB device to the USB port on the Player. 2. Slide USB/CARD switch on the bottom of the Player to USB. Removing a USB device You can remove the USB device anytime even when it is playing. To remove the USB device, simply grasp the end of the USB and remove it from the slot. Playing a USB device 1.
Using Card Reader The Player has a 3-in-1 card reader, accepting MMC(Multimedia card), SD (Secure digital card) and MS (Memory stick). CARD slot Pluging a CARD device 1. Slide the USB/CARD switch on the bottom of the Player to CARD 2. Plug in the CARD device to the CARD port on the Player. 3. Repeatedly press DVD/USB to select USB mode. Removing a CARD device You can remove the CARD device anytime even it is playing. To remove the CARD device, simply grasp the end of the CARD and remove it from the slot.
Using the AC Adaptor This player can be powered by AC through the supplied switching power AC adaptor. It can also use the built-in battery. When the AC adaptor is connected to the unit and powered, the unit will be automatically disconnected electrically from the battery pack and powered by the AC power. To DC12V IN on the DVD player To home power outlet Important ! Always turn off the DVD Player before connecting or disconnecting the AC cord. Only use the AC adaptor supplied with this player.
Using the Battery Pack This player has a built-in rechargeable battery, follow these steps to recharge. 1. Connect the A.C adaptor as illustrated. 2. Slide POWER to OFF. ( The Player must be turned off to charge the battery). 3. The charging starts, and when it is fully charged, the charging stops automatically. To DC12V IN on the DVD player To home power outlet LED Indicator During charging, the red and green LEDs blink alternatively. When the battery is fully charged, the green LED stays lit .
Cautions in Using Battery Pack Danger! Strictly follow these safety information when using the battery pack, Otherwise, a short circuit, overheating, smoke, fire, or damage to the product may result. Never disassemble or modify the battery pack in any way. Do not touch the terminal of the battery pack with a metal object. Do not place the battery pack in direct sunlight, dashboard of a vehicle, or high temperature place. It can cause explosion or fire. Do not expose the battery pack to water, fire, or heat.
Playing a Disc Preparation for Playback Resume 1. Make sure the Player has the power either from the battery or the AC adaptor. 2. Load a disc, following these steps: Open the top cover. Press the OPEN button to open the disc cover. Place a disc into the tray with the label side facing up. Close the disc cover. 3. Slide POWER to ON to turn on the power. 4. Repeatedly press DVD/USB to select DVD mode. There are two ways to resume your playback when interrupted. Method 1. -- for short time interruption 1.
Playing a Disc pressing to start playing the bookmarked scene. The Playback continues until the end of the disc. Repeat the above to play the other marked scenes. Slow Motion 1. During playback, repeatedly press SLOW to play at 1/2, 1/4, 1/8, 1/16 speeds. 2. To resume normal playback, press . You can only perform slow motion play in forward playback. GOTO You can go directly to a desired chapter and play, or play at a desired point of time. Follow these steps: (A)To play a specific chapter 1.
Playing a Disc Mute Angle Press MUTE to silence the audio, press MUTE again to restore it. Repeatedly press ANGLE during DVD playback to change the camera angle if the disc has different camera angles. This function is only valid for DVDs. Displaying disc's MENU During DVD playback, press MENU to return to the disc's Start Menu. If the disc does not have the Start Menu, or discs that refuse MENU function, appears. For VCD playback, press MENU to turn on/off PBC (Playback Control).
Playing MP3 and Regular Audio CD Valid MP3 CD Your MP3 files should be ISO 9660 or JOLIET format. Play In most cases, when an MP3 or audio disc is placed into the player, the first song file of the first folder plays. In other cases, the file manager appears. Use direction keys ( and ) to select the song file and press to play.
Playing Picture CD Valid Picture Rotate The player can play both a Kodak Picture CD that you order from photo processing store, and a home-made CD by burning JPEG files onto a CD-R or CD-RW disc. The picture can be rotated and flipped. 1. During playback, use the direction keys ( and ) to rotate; clockwise 90 degrees, 90 degrees counter clockwise, flip vertically and horizontally respectively. Play In most cases, after the disc is placed into the player, the first file will be shown.
Changing Settings You can make changes on the Player's settings such as OSD language, video output etc, follow these steps: 1. Press SETUP on the remote control, a list of setup pages appears on top of the screen. -- General Setup Page -TV Display Angle Mark OSD Lang Captions Screen Saver Last Memory LB On ENG Off On On Normal/ PS Wide Normal/LB Wide Squeeze Set TV Display Mode 2. 3. 4. 5. Use and to select the Setup Page, press ENTER to confirm.
Changing Settings Video Setup Page Panel Quality Set the panel's Sharpness, Brightness, Contrast, Hue and Color Sautration Panel Inverse Turn the image 180 degree Preference Page (This setup only available when the Player's is not at play) TV Type PBC Subtitle Disc Menu Parental Country Region Default Set TV system that you will connect the Player to Set PBC (Playback Control) on/off .
Specifications General Power Requirements Input AC 100V~240V, 50/60 Hz, Output DC 12V Power Consumption > 12 W Weight 1022g Dimensions Operating Temperature Range 246mm ( W ) x 191.7mm ( D ) x 37.8mm ( H ) +10 O C~ +40 O C Readable Disc Readable USB DVD, DVD-R, DVD+R, DVD-RW,DVD+RW, VCD, CD, HDCD, Picture CD, CD-R, CD-RW, MPEG4, MP3, WMA . Video Output Composite Video 1 channel : 1.
