User's Manual

25

battery charge
Software update swupdate
https://user:pass@10.10
.10.15/t201_070.zip
OR
swupdate
http://10.10.10.15/t201_
070.zip
OR
swupdate
ftp://10.10.10.15/t201_0
70.zip
Fetches and upgrades tag’s
embedded software from a server in
the network.
 Supports http, https and ftp
protocols

When upgrading the tag software
plug the tag to the charger to
avoid accidental loss of power in
middle of upgrade.

Username and password are
optional.

Use software packages provided
by Ekahau only.
Configuration Tips
This section provides tips that guide you in selecting the optimal
configuration for your tags.
 For best performance in accuracy it is recommended let T201 to
scan two times before sending both results to engine. This improves
Engines throughput and accuracy.

Ekahau recommends to use UDP protocol instead of TCP with larger
amount of T201’s that frequently send data to the Engine. This is
because of smaller overhead of the UDP protocol. Note that UPD
protocol transmission is not guaranteed.

To save battery power it is recommended to always use "Sleep
WLAN" option.

Ekahau recommends to use UDP protocol instead of TCP with larger
amount of T201’s that frequently send data to the Engine. This is
because of smaller overhead of the UDP protocol. Note that UPD
protocol transmission is not guaranteed.

TCP protocol is recommended for applications were it is essential for
the engine to receive all packets from the T201’s. TCP protocol
transmission is always guaranteed.