User's Manual

29
FCC RF Radiation Exposure Statement
This equipment complies with FCC Radio Frequency Electromagnetic
Signal (RF) exposure limits set forth for an uncontrolled environment
of portable transmission. This product has been evaluated for RF
exposure at a distance of 20 cm (8 inches). Operation at a separation
distance less than 20 cm (8 inches) from the radiating element to
nearby persons will expose nearby persons to RF levels that exceed
the FCC rules for RF exposure.
CE Marking
This device has been tested and meets the Electromagnetic
Compatibility (EMC) requirements of EN50082-1 and EN50022 for the
CE Declaration of Conformity (DoC).
CHAPTER 4: Care and Limited Warranty
Care and Maintenance
The tag is a product of superior design and craftsmanship and should
be treated with care. The suggestions below will help you to fulfill any
warranty obligations and to use this product for many years.

Keep the tag dry. Precipitation, humidity and all types of liquids or
moisture can contain minerals that will corrode electronic circuits.

Do not use or store the tag in dusty, dirty areas. Its moving parts
can be damaged.

Do not store the tag in hot areas. High temperatures can shorten
the life of electronic devices, damage batteries, and warp or melt
certain plastics.

Do not store the tag in cold areas. When it warms up (to its normal
temperature), moisture can form inside, which may damage
electronic circuit boards.

The operating temperature of the tag is 0 to 50
°
C. Do not operate
the tag outside this temperature range.

Do not attempt to open the tag. Non-expert handling may damage
it.

Do not drop, knock or shake the tag. Rough handling can break
internal circuit boards.