User's Manual

6
WLAN error

Association error

No IP address from
DHCP after 20s when
scan data should be
sent to EPE
2 red flashes when the error
occurs
TAG error
 Scan error
 Other error
3 red flashes when the error
occurs.
Application
defined
A sequence defined and
activated by configuration
parameters.
Any sequence.
System Requirements
1.
Laptop or Tablet PC with at least Windows® XP or 2000, 1 GHz
processor, 256 MB RAM, and 200 MB of disk space.
2.
The laptop must provide a standard 9-pin serial connector for the
tag’s configuration cable. If your laptop has USB connectors only,
purchase an external USB–serial cable (9-pin) adapter.
3. Ekahau splitter cable for connecting the tag to the serial cable
and to a power adapter.
4.
Supported Wi-Fi adapter (see http://www.ekahau.com/devices or
Ekahau Client Release Notes) to create a Positioning Model.
Communication with the tags can be facilitated via the Wi-Fi
adapter, or Ethernet cable, provided that your Ethernet network
is connected to your Wi-Fi network.
5. The Ekahau Positioning Engine (EPE) software, license keys, and
license files, fully installed on the laptop PC.
6.
At least 3 operational Wi-Fi access points (802.11b/g).
7.
Map image of the facility or area (JPG or PNG). You can draw a
map image yourself with any drawing tool, if necessary.