User's Manual

9
The correct COM
port settings. If
you cannot access
the CLI, try a
different COM port
number, such as
COM2 or COM3.
6. Switch on the tag by keeping the call / on-off button
pressed
down for 5 seconds
. Release when green status LED appears. It
may take up to 10 seconds until the tag displays its CLI prompt.
If the battery is too low or empty, you will get red status LED or
no light at all. Then plug the power cable in and try again.
NOTE
If the tag is already switched on, you may need to press the
Enter key once or twice to bring up the CLI prompt.