User's Manual

2.9 Charging the T301-B tag
Figure 2.3. Connecting the tag with a charger.
The T301-B tag is delivered with the battery charged to a storage charge, and it is recommended
to fully charge the batteries before first time activating the tag. To ensure the tag battery is full,
please put the tag in to a charger for 4 hours. To remove the charger plug, release the plug by
pressing the latches on the plug and pull the plug out.
The tag will give a notification when the tag battery is low. Connect the charger and the Right LED
will show orange light during the charging. after the tag is fully charged the Right LED will turn
green. If the tag battery is completely empty, the tag will automatically turn off. After a charger is
connected, the tag will automatically return to it's normal function, maintaining last settings.
The Ekahau supported adapters are
1. FW7650/05 Ekahau T301-B Charger
2. CMC-301B-1 Ekahau multi charger for T301-B
Note
In case the tag battery is completely empty, typically when left empty and uncharged for several
days, is may a long time for the tag even to turn on the orange led. Just connect the charger
and leave the tag to recharge overnight.
Warning
Only use Ekahau supported adapters for charging the tags.
Chapter 2. Tag operation
7