User's Manual

3 Ekahau Activator T301
3.1 Installing Ekahau Activator
Note
NOTE! To verify a successful activation Ekahau Positioning Engine is needed. To install Ekahau
Positioning Engine refer to the Ekahau Positioning Engine user guide. Normally the Ekahau
Positioning Engine is installed together with the Ekahau RTLS installation.
To install Ekahau Activator as a stand alone:
1. Choose a laptop computer with Windows XP, at least 256 MB of memory, PC card slot, and
100 MB of free hard disk space.
2. Install a supported 802.11b/g adapter, available from corporate IT department or most com-
puter dealers.
- Make sure the adapter is supported. For list of supported adapters see Supported Wireless
LAN Adapters on page 9
- Refer to the adapter's user manual for correct installation
3. Run the Ekahau Activator installer from it's location, and follow the instructions on your screen.
3.2 Supported Wireless LAN Adapters
Ekahau Activator T301 supported adapters are
ModelBrand
Ekahau NIC-54Ekahau
F6D3010Belkin
CB-21AGCisco
DWL-AG650D-Link
DWL-AG660D-Link
AirLancer MC-54agLANCOM
WPC66AGLinksys
Aterm WL54SCNEC
WAG511NetGear
WAG511v2NetGear
2202Nortel Networks
Orinoco 8480Proxim
EZ Connect Universal SMC2336W-AGSMC
Chapter 3. Ekahau Activator T301
9