User's Manual

3.3 Activating T301-A Tags
For the tags to be able to communicate with the Ekahau Positioning Engine, the tag needs to be
activated e.g. the tag needs to be given the neccesary parameter to associate to the network. At
least the IP Address of the Ekahau Positioning Engine, SSID of the network used and the IP
configuration method are required. To activate T301-A tags, first start the Ekahau Activator T301.
To activate the tags for survey usage please refer to Ekahau Location Survey User Guide chapter
Using Ekahau T301 Location Tag
3.3.1 Positioning Engine settings
Input the IP address of the Ekahau Positioning Engine. After completing the "Positioning engine
settings" The status bar should show "Engine Ok". These are the minimum settings needed.
In case Engine Port, Maintenance port or Maintenance IP needs to be changed go to "Advanced"
mode.
10
Chapter 3. Ekahau Activator T301