User's Manual

Note
When activating the T301-A tags, only an initial setup is required for the tag to associate with
the network. All the settings can be set and changed from the Ekahau Positioning Engine.
Ekahau Activator T301 only provides a set of basic settings.
3.3.2 Scan settings
Select the correct area the tag is used in. FCC for North America, ETSI for Europe and Japan for
Japan. The software automatically disables the channels not available for the area selected. It is
also recommended to only select the channels used in you network. Activating the unused channels
will only reduce the battery lifetime of the tag. After completing the settings the status bar should
show "Scan Ok"
Chapter 3. Ekahau Activator T301
11