User's Manual

If the supported WLAn adapter is inserted and all the settings are shown Ok in the status bar, the
Activate button should now be active. To continue Activating the Tags press the "Activate" BUTTON.
Tip
After finished inputting the configuration, you can save it for future use from the file menu. If
you save the settings on Ekahau Activator T301.ini the setup will be the default every time the
Activator is started.
3.3.5 Activating the tags
The Activation window shows all the settings on the upper side of the window. The list of the
activated tags will appead on the area below.
14
Chapter 3. Ekahau Activator T301