User's Manual

ValuesDescriptionSetting
LED; LED and Buzzer
Duration: 10s; 1min; 10min; 30min;
1h; 2h
Launches the alarm at the tag with
LEDs and buzzer of silently with
LEDs only. The alarm duration can
be set.
LED / Buzzer
-Not used for T301 family tagsRequest info
-Manual command or a list of com-
mands can be sent to a tag.
Manual Commands
A list of available configs. Go to
configs page to create tag configur-
ations.
A pre defined config can be selected
and sent to tag(s)
Set Config
Firmware Update
A list of available firmware updates
uploaded in EPE. The firmware
needs first to be uploaded into EPE,
this is done in configs page.
Tag firmware can be updated. The
new firmware needs to be first
uploaded in the configs page
Firmware
Create New Group
Free textNew group is created and the tag is
included into this created group.
Group Name
Manual IP Settings
IP AddressSets the tag IP AddressManual IP address
IP AddressSets the tag netmaskNetmask
IP AddressSets the default gateway for the tagGateway
Delete
-The tag is deleted fro the system.
All statistics are cleared. The tag will
appear in the system again when it
report it's location next time.
Delete
Chapter 4. Tag configuration
21