User's Guide

15
Chapter 2. Initial Activation of the Tag
Setting
Description
Values
Default Value
Maintenance Port(UPD)
Port number of mainten-
ance protocol port of ERC
Port Number
8553
Maintenance interval
The interval of the peri-
odic maintenance calls in
seconds
0 - 63072000
10
Scan Settings
Scanning Interval
The interval of the peri-
odic location scans in
seconds
0 - 63072000
10
Scan Channels
Sets the channels that are
scanned
Enabled; Disabled
1-11 Enabled; 12-14
Disabled
WLAN Settings
SSID
Sets the Wi-Fi network
name -Service set identi-
fier
SSID=max 32 digits
default
Encryption
Selects if WEP encryp-
tion is used
No Encryption; WEP
64/128; WPA2-PSK
No Encryption
WEP
Sets the WEP pass-
phrase
ASCII: 5 or 13 charac-
ters
HEX: 10 or 26 hexa-
decimal numbers (0-f)
-
WEP Key Index
Sets the WEP Key index
used
1-4
1
WPA2-PSK
Sets the WPA2-PSK
encryption and pass-
phrase
8-63 ASCII characters
-
WPA-PSK
Not supported with W4
IP Settings
IP method
Defines the IP address
assigning method
DHCP; Static
DHCP
Static IP Settings
Address range
Sets the start and end
address of the range used
to assign the IP
addresses to the tags
when Static IP is used
IP address
0.0.0.0
0.0.0.0
Network mask
Tag netmask when static
addressing is used
IP address
0.0.0.0
IP gateway
IP network gateway when
static addressing is used
IP address
0.0.0.0