User's Guide

!
Chapter 3. Configuration After Initial
18
Activation !
Setting
Description
Values (Default underlined)
IP Address
Sets the ERC IP Address.
IP Address
Location update Port (UDP)
Port number of location protocol port
of ERC
Port Number
Maintenance port (UDP)
Port number of maintenance pro-
tocol port of EPE.
Port Number
General
Name
Name for the configuration set.
Free text
Description
Description for the configuration set.
Free text
Channels
Scan Channels
Sets the channels scanned during a
location scan.
1-11; 12 (EU); 13 (EU); 14 (Japan)
Periodic Location Update and Maintenance
Periodic Location Update
Enables or disables the periodic
location update.
Enabled; Disabled
Location Update Interval
Sets the interval for the periodic
location update.
The interval in Seconds, Minutes,
Hours or Days
Periodic Maintenance
Enables or disables the periodic
maintenance calls.
Enabled; Disabled
Maintenance Interval
The interval of the periodic mainten-
ance calls in seconds.
The interval in Seconds, Minutes,
Hours or Days
Sensors
Motion Sensor
Enables or disables motion sensors.
Disabled
Profile 1 (in motion for 8s)
Profile 2 (in motion for 4s)
Profile 3 (in motion for 2s)
Profile 4 (in motion for 1s)
Motion Update Method
Sets whether location updates are
sent periodically during the motion or
just when the motion starts and after
the movement has ended.
In-motion and after motion; After
motion
Motion Update Interval
Sets the interval for motion updates.
5s; 10s; 30s; 1min; 2min; 5min
Motion Stagnant Event
Enables or disables stagnant sens-
ing.
Enabled; Disabled
Motion Stagnant Treshold
Sets how long the tag has to remain
stagnant to produce a stagnant
event.
The threshold in Seconds, Minutes,
Hours or Days