User's Guide

23
Chapter 4. Tag Operation
Figure 4.1. W4 insertion in the Single Charger.
1. Slide the tag with the connectors downward to the charging slot.
2. Press the top of the tag towards the clip until it clicks in the charging position and the charging
light turns on (under the button of the tag). Note that if the battery is fully discharged, it may take
up to 15 minutes for the charging light to turn on.
Deattach the tag from the charger by gently pulling the clip away from the tag until the tag is
released from the charging position.
The W4 tags are attached to the Multi Charger as illustrated below.