User's Guide

Chapter 4. Tag Operation
24
Figure 4.2. W4 insertion in the Multi Charger.
1. Slide the tag with the connectors downward to the charging slot.
2. Press the top of the tag towards the clip until it clicks in the charging position and the charging
light turns on (under the button of the tag). Note that if the battery is fully discharged, it may take
up to 15 minutes for the charging light to turn on.
Detach the tag from the charger by gently pulling the clip away from the tag until the tag is
released from the charging position.
Note
In case the tag battery is completely empty, typically when left empty and uncharged for several
days, it may take a long time for the tag even to turn on the orange led. Just connect the charger
and leave the tag to recharge overnight.
Warning