User's Guide

3
Chapter 1. Introduction
Figure 1.2. Inserting the wristband
1. Lift the end of the wristband to slide the beginning into the bar on the tag. The wristband will
not attach in any other position
2. Push the beginning part (tag side) of the wristband downwards
3. Lift the end of the wristband. The wristband is now locked onto its position.
For removal, push down the end of the wristband and lift the beginning part (tag side) up.
1.5 Status Indication LEDs
The tag is equipped with two multi-color LEDs that provide status indication. The table below lists
the different modes of the tag LEDs:
Action
LED
Status
Activation
3 x Green
12 x Red
Activation successful
Activation failed
De-activation (Reset)
3 x Green and Red
Reset successful
Charging
Orange
Green
Charging
Battery full
Button press
1 x Orange
Button press recognized