MSDS

Safety Data Sheet
Graco Pump Armor
Revision Date:
1/20/15
SDS Number:
MSD029EN
SECTION 7
Handling procedures:
Storage procedures:
Additional information:
SECTION 8
Personal protection:
Respiratory protection:
Eye protection:
Hand protection:
Other protection:
Local control measures:
Other:
SECTION 9
Appearance:
Odor:
Odor threshold:
pH:
Melting/Freezing point:
Initial boiling point:
Boiling range:
Flash point:
Evaporation rate:
Flammability:
Upper flammable limit:
Impervious, chemically resistant gloves such as neoprene or nitrile rubber to avoid skin
sensitization and absorption.
Use of an apron and overboots of chemically impervious materials such as neoprene or nitrile
rubber is recommended based on level of activity and exposure. If handling hot material use
insulated protective equipment. Launder soiled clothes. Properly dispose of contaminated
leather articles and other materials which cannot be decontaminated.
Applicable mainly to persons in repeated contact situations such as packaging of product,
service/maintenance, and cleanup/spill control personnel.
Use adequate ventilation when working with material in an enclosed area. Mechanical methods
such as fume hoods or area fans may be used to reduce localized vapor/mist areas. If vapor or
mist is generated when the material handled, adequate ventilation in accordance with good
engineering practice must be provided to maintain concentrations below the specified exposure.
Eyewash stations and showers should be available in areas where this material is used and
stored.
Consumption of food and drink should be avoided in work areas where product is present.
Always wash hands and face with soap and water before eating, drinking or smoking.
Approximately 10-11.
Not determined.
Not determined.
Not determined.
118°C (>244°F) typical by ASTM D 92 for Ethylene Glycol.
Not determined.
Not determined.
Not determined.
None required if ventilation is adequate. Otherwise a respiratory protection program meeting
OSHA 1910.134 and ANSI Z88.2 requirements must be followed. Where misting may occur,
wear an MSHA/NIOSH approved (or equivalent) half-mask form dust/mist air purifying respirator.
Eye protection is strongly recommended. Wear safety glasses with side shields or vented/splash
proof goggles (ANSI Z87.1 or approved equivalent).
Keep containers closed when not in use. Do not transfer to unmarked containers. Empty
containers retain product residue which may exhibit hazards of material, therefore do not
pressurize, cut, glaze, weld, or use for any other purposes. Return drums to reclamation centers
for proper cleaning and reuse.
Handling temperatures should not exceed 60°C (140°F) to minimize danger of burns. Open
containers carefully in a well ventilated area or use appropriate respiratory protection. Wash
thoroughly after handling.
Store containers away from heat, sparks, open flame, or oxidizing materials. Extended storage
at excessive temperatures may produce odorous and toxic fumes from product decomposition.
No additional information.
Clear blue liquid.
HANDLING AND STORAGE
EXPOSURE CONTROLS / PERSONAL PROTECTION
Not determined.
Mild, sweet odor.
PHYSICAL AND CHEMICAL PRPERTIES
Page 3 of 6