Instruction manual

2
1
INTRODUCTION
NO MODIFICATIONS or alterations of any AIRLESSCO Equipment or part is allowed.
All Service Procedures to be performed by an Authorized Airlessco Service Center ONLY.
HANDLE THIS UNIT AS YOU WOULD A LOADED FIREARM!
HIGH PRESSURE SPRAY CAN CAUSE EXTREMELY
SERIOUS INJURY. OBSERVE ALL WARNINGS!
MANUAL NOTATIONS
WARNING - Alerts user to avoid or correct conditions that
could cause bodily injury.
CAUTION - Alerts user to avoid or correct conditions that
could cause damage to or destruction of equipment.
IMPORTANT - Alerts users to steps or procedures that are
essential to proper equipment repair and maintenance.
NOTE - Identies essential procedures or extra information.
BEFORE OPERATING THIS UNIT, READ AND FOLLOW
ALL SAFETY WARNINGS AND INSTRUCTIONS RELATED
TO THE USAGE OF THIS EQUIPMENT ON PAGES 2, 3 & 4.
READ, LEARN, AND FOLLOW THE PRESSURE RELIEF
PROCEDURE ON PAGE 8 OF THIS MANUAL.
SL810
910E
SL1100
1110E
Max Pressure 3300 PSI 3300 PSI
Output (FreeFlow) 0.90 GPM 1.10 GPM
Output (At Pressure) 0.80 GPM 1.00 GPM
Tip Size (1 Gun) 0.031 in. 0.033 in.
Tip Size (2 Gun) 0.019 in. 0.021 in.
Motor DC TEFC
1.25 HP
DC TEFC
1.25 HP
Weight 135 lbs 141 lbs
WARNING
Your new Airlessco or ALLPRO airless series paint
sprayers are designed to meet the demands of the
professional painting contractor as well as the homeowner.
The famous Airlessco slow-stroking stainless steel piston
pump delivers extra long life for the piston, packings, valve
seats and balls. The patented Triple-Life packing system is
externally adjustable, extending packing life and reducing
repacking costs. Its large high-torque electric motor runs
slower reducing heat. The motor is fan cooled and totally
enclosed to reduce brush wear and to prevent the ignition
of paint fumes in the motor.
Model 810, 910E, 1100, and 1110E spray a wide range of
coatings from latex to block ller, elastomerics, and epoxy.