Specifications

14
15
During use, especially with latex paint, high pres sure will cause the ori ce to grow larger.
This de stroys the pattern that distributes the paint ef ciently across the surface being
sprayed. Always replace tips before they become excessively worn. Worn tips waste paint,
cause overspray, make cut ting-in dif cult, and can decrease sprayer per formance.
Thickness of the paint coat per stroke is de ter mined by spray tip "fan width", the rate of the
spray gun move ment, and the distance to surface you are painting.
Two tips having the same tip size, but different pat tern widths will deliver the same amount
of paint over a dif fer ent area (wider or narrower strip). A spray tip with a narrow pattern
width makes it easy to spray in tight places.
REV-TIP
™
SELECTION CHART
SPRAY TIP REPLACEMENT
PATTERN WIDTH
SPRAY TIP SELECTION
Spray tip size is based on how many gallons of paint per
minute can be sprayed through the tip. Do not use a tip
larger than the max i mum pump  ow rate or capacity the
sprayer can ac com mo date. Pump  ow rate is mea sured
in gallons per minute (GPM).
Spray tip selection is based on paint viscosity, paint type,
and job needs. For light viscosities (thin paints), use a
smaller tip; for heavier vis cos i ties (thicker paints), use a
larger tip size.
Protected By U.S. Patent No. 6,264,115 Other U.S. & Foreign Patents Applied For.
SPRAY PAINTING TIP - ORIFICE SIZE
(
Inches
)
(water @ 2000psi, 138 bar)
(latex paint @ 2000psi,
138 bar/1.36 spec. gr.)
*Pump will support tip worn to next larger size.
Water Flow Rate (gal./min.)
.12 .18 .24 .31 .38 .47 .57 .67 .77 1.03 1.31 1.63 1.80
(liters/min.)
.49 .69 .91 1.17 1.47 1.79 2.15 2.54 2.96 3.90 4.98 6.17 6.81
Paint Flow Rate (gal./min.)
.10 .15 .21 .27 .33 .40 .49 .58 .66 .88 1.12 1.39 1.54
(liters/min.)
.38 .57 .79 1.02 1.25 1.51 1.85 2.20 2.50 3.33 4.24 5.26 5.83
Pump Minimum (gal./min.)
.25 .25 .33 .40 .50 .60 .75 .88 1.0 1.25 1.5 2.0 2.2
Output
*
(liters/min.)
1.0 1.0 1.25 1.5 1.9 2.3 2.8 3.3 3.8 4.7 5.7 7.5 8.2
REV-TIP
TM
for Painting 561-XXX
Fan Width (12” from surface)
in. (mm)
.007 .009 .011 .013 .015 .017
.019 .021 .023 .025 .027 .031
.035 .039 .041
4-6 102-152
209 211 213 215 217
219 221 223 225 227 229
6-8 152-203 307
309 311 313 315 317
319 321 323 325 327
335
8-10 203-254
409 411 413 415 417
419 421 423 425 427 431
10-12 254-305
511 513 515 517
519 521 523 525 527 531
535
12-14 305-356
611 613 615 617
619 621 623 625 627 631
635 639 641
14-16 356-406
715 717
721
739
741,745
16-18 406-457
815
819 821
831
20-24 508-610
W21 W23 W25
Gun Filter
C = Coarse
F
F F F,C C C
C C C REMOVE FILTER
F= Fine
Wood
Lacquer, Varnish
•
•
Interior
Stain, Sealer
•
•
•
Enamel
•
•
Wood
Exterior Stain
• •
Exterior
Vinyl, Acrylic, Latex
•
•
Masonry
vinyl,oil-base
alkyd
• •
Latex, Acrylic
•
•
• •
Block Filler
• • • • •
• • •
Elastomer
•
•
•
• • • • •
Ceiling
Hi Build, Mil White
•
•
Structural Steel
Heavy Coatings
•
•
•
•
•
•
•
•
.029
NEW WIDE PATTERN REV-TIP ►