Specifications

PROBLEM CAUSE SOLUTION

Unit doesn't prime Airleak due to:

• Loose Suction Nut • Tighten Suction Nut

• Worn O-Rings • Service Suction Assy

• Leak in Siphon Assy • Replace Siphon Assy

Stuck or Fouled Balls Service outlet valve suction

assembly

Unit primes but has no Pressure set too low Turn up pressure

or poor pressure

Filter(s) are clogged Clean or replace gun lter, inlet

lter and/or manifold lter

Outlet Valve fouled/worn Service outlet valve

Prime valve Clean or replace prime valve

bypassing

Packings and/or piston worn • Tighten packing nut

• Repack unit

Unit does not maintain Blown spray tip Replace spray tip

good spraying pressure

Packings and/or piston worn Repack unit

Upper Seat worn Replace upper seat

Unit does not run Circuit Breaker Tripped Reset Breaker

Engine Oil Level Low Check Engine Oil Level

 Place Machine On Level Surface

FIELD TROUBLESHOOTING