Instruction manual

Technical Data
30 3A1185F
Technical Data
Power requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120V AC, 60 hz, 11A, 1 phase
230V AC, 50/60 hz, 7.5A, 1 phase
Generator required. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3000 w minimum
Maximum working pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3000 psi (21 MPa, 207 bar)
Maximum delivery gpm (lpm) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LP400 - .46 (1.75)
LP500 - .54 (2.0)
LP600 (International) - .66 (2.5)
LP700 - .74 (2.8)
LP600 (North America) - .85 (3.2)
Maximum tip size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LP400 - .021
LP500 - .023
LP600 (International) - .025
LP600 (North America)/LP700 - .027
Fluid outlet npsm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/4 in.
Wetted parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . zinc and nickel-plated carbon steel, nylon, stain-
less steel, PTFE, acetal, leather, UHMWPE,
aluminum, tungsten carbide