Specifications

Striping Tip Guide
STRIPING TIPREGULAR PAINTING SPRAY TIP
UNIFORM PATTERN
LIGHTHEAVY
Striping Tips (orange handle) should not be used for regular spraying. They are designed for a single
pass application, while spray tips (black handle) are designed for the 1/3 overlap technique used for
spray painting.
Spray Tip Replacement: During use high pressure will cause the orifice to grow larger and more round. This
destroys the efficiency of the pattern, wasting your material. It can also leave tailing or two heavy lines on the
outside of the pattern.
STRIPING TIP - ORIFICE SIZE
(
Inches
)
in (mm)
.009
.011 .013
.015 .017
.019
.021
.023 .025 .027
.031
.035
1-2 25-51
113ST
115ST 117ST
119ST
2-4
51-102
215ST
217ST
219ST 221ST
4-6 102-152
315ST
317ST
319ST 321ST
6-8 152-203
Striping Paint
Oil Base Oil Base
Latex Latex
Latex Latex
LatexLatex
Rev-Tip
TM
for Striping
Fan Width
(6” from surface)
REV-GUARD
TM
Super Compact
P.N. 561-001
11/16-16 “F” Thread. Fits:
Airlessco, and some ASM,
Wagner, and Campbell Hausfeld.
P.N. 561-002
7/8-14 “G” Thread.
Fits some: Graco, Wagner,
Titan, Airlessco.
560-215
REV-TIP
TM
Orifice Size
1/2 Fan Width
Sample:
REV-TIP
T
M
for Striping
P.N. 562-xxxST
Includes Rev-Tip
TM
, Metal Seal
& O-Ring Seal.
(water @ 2000psi, 138 bar)
(latex paint @ 2000psi,
138 bar/1.36 spec. gr.)
*Pump will support tip worn to next larger size.
Water Flow Rate
(gpm)
.12 .18
.24 .31 .38 .47
.57
.67
.77 1.03 1.31 1.63
1.80
(lpm)
.49 .69
.91 1.17
1.47
1.79 2.15
2.54 2.96
3.90 4.98 6.17
6.81
Paint Flow Rate
(gpm)
.10 .15
.21 .27 .33 .40
.49
.58
.66
.88
1.12 1.39
1.54
(lpm)
.38 .57
.79 1.02
1.25 1.51 1.85
2.20 2.50
3.33 4.24 5.26
5.83
Pump Minimum
(gpm)
.25 .25
.33 .40 .50 .60
.75
.88
1.0
1.25
1.5 2.0 2.2
Output
*
(lpm)
1.0 1.0 1.25
1.5 1.9 2.3
2.8
3.3
3.8
4.7
5.7 7.5 8.2
LIGHT
13