Specifications

V-PACKING REPLACEMENT

FIG. 20

V-PACKING REPLACEMENT KIT (187-040)

Refer to Figures 20 & 21

Repack Kit contains all leather & plastic V-packings,

O-Rings, balls, dual side adapter and larger metal

male glands.

See the table on page 20 for a complete list of re-

pack kit components.

GLAND KIT (187-064)

Refer to Figures 20 & 21

Gland Kit contains four metal male glands.

See the table on page 20 for a complete list of gland

kit components.

V-PACKING REPLACEMENT

Refer to Figures 18, 19, 20 & 21

1. Remove the uid pump as per the "Fluid Pump

Disconnect" instructions on page 16.

2. Remove and service the inlet valve as described

in the "Servicing Inlet Valve" instructions on page

17.

3. Using the rod collar tool (189-211) unscrew and

remove the packing nut (187-046). Push the piston

rod down through the packings and out of the

pump. Utilizing packing removal tool (187-249) the

complete packing set can be removed quickly and

easily. Another method is to wrap some masking

tape around the bottom of the piston. Now push

the piston back through the pump and remove

through the top. The packings and glands will be

removed with the piston rod, leaving the uid body

(187-313) empty.

4. Disassemble and discard old packings. Clean all

parts that will be reused for reassembly.

NOTE: Save metal upper glands (187-026 &

187-025) for reuse and reassembly.

5. Remove and service the outlet valve as described

in the "Servicing outlet Valve" instructions on page

17.

Part No. Table for Figures 18

thru 21 is located on page 20.