Specifications

30
AIRLESS ATOMIZER KIT (120-117)
FIG. 33
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
HOPPER ASSEMBLY (331-441)
1
2
1 301-442 Hopper Assy (32 Gal)
2 119-107 Swivel Assy
PARTS LIST FIGURE 34
I TEM N O. P ART N O. D ESCRIPTION
FIG. 34
Operating Instructions
• Always turn on air pressure on rst, preventing backow of material into the air system
• For best performance use with 1 gallon per minute or greater airless paint sprayer
• For fog nish and ne orangepeel, use tip #13 or 16 and apply maximum air ow
• For medium orangepeel and splatter coat, use tip # 14 or 17 and apply medium air ow
• For heavy splatter coat and knockdown nish use tip # 15 or 17 and apply less air ow
1 Tip, 1/4" Medium-Flat Fan
2 Tip, 3/16" Fine-Flat Fan
3 Tip, 1/4" Large-Round Fan
4 Tip, 3/16" Medium-Round Fan
5 Tip, 1/8" Fine-Round Fan
6 Tip Retainer
7 Air Nozzle
8 Front Housing
9 O-Ring
10 Back Housing
11 Stem
12 Nut 7/8"-14 (G Thread)
13 Fluid Seal
14 Nut 11/16-16 (F Thread)
15 Air Tube
16 Air Flow Valve
17 Air Fitting
PARTS LIST FIGURE 33
I TEM N O. D ESCRIPTION
Do not exceed 950psi of pump
pressure when using the atomizer
Operator must thorougly clean the atomizer
and component parts after each use. Leftover
debris will cause poor spray performance