5-Port 10/100/1000Mbps Gigabit Ethernet Switch User Guide 5-Port 10/100/1000Mbps Gigabit Ethernet Switch (Desktop) User Guide UG-AGIGA5SW-1105 AirLink+ 1
5-Port 10/100/1000Mbps Gigabit Ethernet Switch User Guide This equipment has been tested and found to comply with the regulations for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
5-Port 10/100/1000Mbps Gigabit Ethernet Switch User Guide Table of Contents About this Guide ............................................. 4 Terms .......................................................................... 4 Overview of This User Guide .................................. 4 Introduction ...................................................... 5 Gigabit Ethernet Technology ................................... 5 Switching Technology .............................................. 6 Features ......
5-Port 10/100/1000Mbps Gigabit Ethernet Switch User Guide About This Guide This user's guide tells you how to install your 5-Port 1000BASE-T Gigabit Ethernet Switch, how to connect it to your Gigabit Ethernet network. Terms & Usage For simplicity, this documentation uses the terms "Switch" (first letter upper case) to refer to the 5-Port 1000BASE-T Gigabit Ethernet Switch, and "switch" (first letter lower case) to refer to all Ethernet switches, including the 5-Port 1000BASE-T Gigabit Ethernet Switch.
-Port 10/100/1000Mbps Gigabit Ethernet Switch User Guide Introduction This section describes the features of the 5-Port 1000BASE-T Gigabit Ethernet Switch, as well as providing some background information about Gigabit Ethernet and switching technology. Gigabit Ethernet Technology Gigabit Ethernet is an extension of IEEE 802.
5-Port 10/100/1000Mbps Gigabit Ethernet Switch User Guide amount of time. Switching Technology Another key development pushing the limits of Ethernet technology is in the field of switching technology. A switch bridges Ethernet packets at the MAC address level of the Ethernet protocol transmitting among connected Ethernet or fast Ethernet LAN segments. Switching is a cost-effective way of increasing the total network capacity available to users on a local area network.
5-Port 10/100/1000Mbps Gigabit Ethernet Switch User Guide Features The 5-Port 1000BASE-T Gigabit Ethernet Switch was designed for easy installation and high performance in an environment where traffic on the network and the number of users increase continuously.
5-Port 10/100/1000Mbps Gigabit Ethernet Switch User Guide Unpacking & Installation This chapter provides unpacking and setup information for the Switch. Unpacking Open the shipping carton and carefully unpack the contents. The carton contains the following items: • • • • One 5-port 10/100/1000Mbps Gigabit Ethernet Switch One external power adapter Four rubber feet to be used for shock cushioning This User's Guide If any item is missing or damaged, contact your local reseller for replacement.
5-Port 10/100/1000Mbps Gigabit Ethernet Switch User Guide External Components This section identifies all the major external components of the switch. Both the front and rear panel is shown, followed by a description of each panel's feature. Front Panel Figure 1 shows the Switch’s front panel. Figure 1.
5-Port 10/100/1000Mbps Gigabit Ethernet Switch User Guide LED Indicator Panel The LED indicator panel contains the following indicators: • • • • POWER - This indicator lights green when the Switch is receiving power, otherwise, it is off. Link/Act - These LED indicators are lighted up when there is a secure connection (or link) to the desired port. The LED indicators blinking whenever there is reception or transmission (i.e. Activity-Act) of data occurring at a port.
5-Port 10/100/1000Mbps Gigabit Ethernet Switch User Guide 1000BASE-T Ports Five Gigabit Ethernet ports of 10/100/1000Mbps AutoNegotiation interface. DC Power Jack Power is supplied through an external AC power adapter. Check the technical specification section for information about the AC power input voltage. Since the switch does not include a power switch, plugging its power adapter into a power outlet will immediately power it on.
5-Port 10/100/1000Mbps Gigabit Ethernet Switch User Guide Technical Specifications Tables 1 to 3 provide Switch specifications. Table 1. General Specifications Feature Standards Description IEEE 802.3 10 Base-T ethernet IEEE 802.3a 100 Base-TX fast ethernet IEEE 802.3ab 1000 Base-T gigabit IEEE 802.
5-Port 10/100/1000Mbps Gigabit Ethernet Switch User Guide Table 2. Physical & Environmental Specifications Feature Specification DC inputs 7.5 V, 1.5 A Power consumption 8.
5-Port 10/100/1000Mbps Gigabit Ethernet Switch User Guide Table 3. Performance Specifications Feature Specification Transmission method Store-and-forward RAM buffer 256 Kbytes per device Filtering address table 8K entries per device Packet filtering/ forwarding rate Full wire speed MAC address learning Self-learning, auto-aging Technical Support E-mail: support@airlinkplus.com Toll Free: 1-888-746-3238 Web Site: www.airlinkplus.
5-Port 10/100/1000Mbps Gigabit Ethernet Switch User Guide AirLink+ 15
5-Port 10/100/1000Mbps Gigabit Ethernet Switch User Guide Copyright 2003 AirLink+. All rights reserved. AirLink+, the stylized AirLink+ logo, specific product designations, and all other words and logos that are identified as trademarks and/or service marks are, unless noted otherwise, the trademarks and service marks of AirLink+. All other product or service names are the property of their respective holders. AirLink+ products are protected under numerous U.S.
