Quick Start Manual

ManualsBrandsAirLink ManualsAdaptersAirLink AG32PCI

Quick Installation Guide

10/100/1000Mbps PCI Network Adapter

Model # AG32PCI

Hardware Installation

Thanks for your purchase of Airlink101® 10/100/1000Mbps PCI Network

Adapter. The Installation of the 10/100/1000Mbps PCI Network Adapter

requires hardware installation first and then driver installation.

Step 1 Switch off the computer, unplug the power cord, and remove the

computer’s cover.

Step 2 Select an unused PCI slot and remove its protective bracket.

Step 3 Carefully insert the Adapter and press until all the edge connectors

are firmly seated inside the slot.

Step 4 Install the bracket screw, which secures the Adapter to the

computer’s chassis.

Package Contents:

• 10/100/1000Mbps PCI

Network Adapter

• Quick Installation Guide

• Driver CD

Section 1

Ver. 1A

Summary of content (5 pages)

PAGE 1
Ver. 1A Quick Installation Guide 10/100/1000Mbps PCI Network Adapter Model # AG32PCI Package Contents: • 10/100/1000Mbps PCI Network Adapter • Quick Installation Guide • Driver CD Section 1 Hardware Installation Thanks for your purchase of Airlink101® 10/100/1000Mbps PCI Network Adapter. The Installation of the 10/100/1000Mbps PCI Network Adapter requires hardware installation first and then driver installation. Step 1 Switch off the computer, unplug the power cord, and remove the computer’s cover.
PAGE 2
Step 5 Replace the computer’s cover and connect the network cable to the newly installed network Adapter. Reconnect the computer’s power cord and plug it into the power outlet. Section 2 Driver Installation Usually for Windows XP or above, the adapter’s driver is already included in the OS, and after you install the network adapter, your system will automatically install the driver for you.
PAGE 3
Windows 2000: Click Next at the Found New Hardware Wizard. Select Search for a suitable driver for my device (recommended) and click Next. Windows ME: Click Next at the Add New Hardware Wizard. Select Specify the location of the driver (Advanced) and click Next. Windows 98SE: Click Next at the Add New Hardware Wizard. Select Search for the best driver for your device (Recommended) and click Next. Step 2 Check on Include this location in the search.
PAGE 4
Step 3 Click Next to install the driver. Step 4 Click Continue Anyway at the Windows Logo Compatibility message.
PAGE 5
Windows 2000: Click Yes to continue. Windows ME: Insert the Windows ME CD-ROM and click OK. Windows 98SE: Insert the Windows 98SE CD-ROM and click OK. Step 5 Click Finish. Restart your computer. Section 3 Technical Support E-mail: support@airlink101.com Toll Free: 1-888-746-3238 Website: www.airlink101.com *Actual throughput will vary. Specifications are subject to change without notice. All products and trademarks are the property of their respective owners.