User`s manual

34
enable Auto-reconnect to disable this feature.
Connection Control There are 3 modes for you to control the Internet connection:
Connect-on-demand: Router will connect to the ISP when its
clients send outgoing packets.
Auto Reconnect (Always-on): Router will keep the connection
to the ISP after the connection is established.
Manually: Router will not connect to the ISP until user clicks the
Connect button on the Status-page.
PPPoE Service Name Enter the DSL service company. This is optional.
Assigned IP Address Input the IP address you wish to use. This is optional.
MTU (Maximum Transmission Unit) The most common MTU value is 1492. You can configure it as
your ISP suggested.
After you‘ve finished all settings, click Save to save the settings and click Reboot. The
change will take effect after rebooting the router.