Quick Start Manual

2
LEDs Status Description
Status Blinking (Green) Device status is working properly
On (Green) Router is on.
On/Sleep
Off Router is at power saving mode.
On (Green) Network device is connected
WAN
Blinking Data access
On (Green) Network device is connected
LAN 1~4
Blinking Data access
On (Green) Wireless feature is enabled
Blinking Data access
Blinking Rapidly Device is in WPS PBC mode
Wireless
Off Wireless feature is disabled
Button Description
Reset/WPS
Reset router to factory default settings or start security
synchronization function (WPS). Press this button and
hold for 6 seconds to restore all settings to factory
default. Press this button and hold no longer than 1
second to start security synchronization.
WLAN On/Off Switch on/off router’s wireless feature.
B. Back Panel
3
Configuring the Router
Note: Prior to connecting the router, be sure to power off your
computer, DSL/Cable modem, and the router.
Step 1 Connect one end of a network cable to the WAN port of the router
and connect the other end of the cable to the DSL/Cable modem.
Step 2 Power on the modem.
Item Name Description
Antennas These antennas are detachable 3dBi dipole antennas.
ON/OFF Switch on/off the router.
1 - 4 Local Area Network (LAN) ports 1 to 4.
WAN Wide Area Network (WAN / Internet) port.
PWR Power connector, connects to A/C power adapter.
Section 2