Owner's Manual

Step 5.5.3b Log on to your router’s configuration page from the web browser and

click on Wireless. Then enter the WPS settings.

Step 5.5.3c Make sure that the WPS is Enabled. In the Setup section, select

Configure Wireless Station. Select Enrollee PIN and enter the PIN number

assigned in step 5.6.3a. Press Trigger to begin the connection, save your settings

when completed.

After a few moments both the router configuration screen and the adapter

configuration screen should show a message telling you that a connection is

established.

Note: If you cannot connect successfully with WPS, you need to log in to your router’s

configuration and click on Wireless. Then click Wireless security. Make sure that the

Disable WPS box is NOT checked, refer to Step 5.6.3b.