3.5” Storage Enclosure Model # AEN-U35 Quick Installation Guide Ver.
Introduction The 3.5” External Enclosure provides a simple way to add additional hard disk drive to your notebook or desktop PC. The Enclosure holds standard 3.5" hard disk drive with USB 2.0 interface and data transfer rate of 480 Mbps. Features • LED indicator provides the operating status of your drive • Compatible with any standard 3.
Drive Installation Driver Installation for Windows No driver is required for Windows 2000/XP For Windows 98SE / ME: NOTE: Before connecting USB enclosure, please partition and format your HDD into FAT16 or FAT32 1. Power on the computer. Connect the enclosure with the supplied USB 2.0 cable to any available USB 2.0 port. 2. After the Add New Hardware Wizard appears, click on Next to continue.
3. Select Search for the best driver for your device. (Recommended). Click on Next to continue. 4. Insert the provided Driver CD. Check Specify a location Click on Browse. 5. Locate the folder D:/USB 2.0/GL811EDriver/GL_ReaderDriver_159_98 where D: is the letter of your CD-ROM drive and click on OK to continue. 6. Click on Next. 7. The computer will install the required files automatically and finish the installation. If you want to remove the driver from Windows 98SE, follow the steps below: 1.
Windows 2000/XP 1. With the enclosure connected, click on Start. Choose Control Panel under Settings. Open Administrative Tools. Double-click on Computer Management. 2. Click on Disk Management on the left panel in Computer Management. Locate the newly installed hard drive and right-click on it. Choose Create Partition and follow the instructions on the Create Partition Wizard to create a new partition. CAUTION: DO NOT un-plug the enclosure while it is reading or copying files.
Copyright © 2005 AirLink101. All rights reserved. AirLink101, the stylized AirLink101 logo, specific product designations, and all other words and logos that are identified as trademarks and/or service marks are, unless noted otherwise, the trademarks and service marks of AirLink101. All other product or service names are the property of their respective holders. AirLink101 products are protected under numerous U.S. and foreign patents and pending applications, mask work rights, and copyrights.
