Network Router User Manual

Parameter Description

Enable Static Routing Check/uncheck to disable/enable the NAT function.

Destination LAN IP Enter the IP Address of the destination LAN.

Subnet Mask Enter the Subnet Mask of the destination LAN.

Default Gateway This is the gateway IP Address where packets are sent. Input

the gateway IP Address.

Hop Count Enter the maximum number of steps between network nodes

that data packets will travel. A node is any device on the

network, such as a computer, print server, or router.

Interface This interface tells you whether the Destination IP Address is on

the LAN & Wireless (Ethernet and wireless networks) or the

WAN (Internet).

Add Click on Add to add the routing rule to Router’s routing table.

Reset You can also click ‘Reset’ button to clear all data you entered.

From the Current Static Routing Table, you can check each Static Routing setting.

Parameter Description

Delete If you want to delete a setting, check the ‘select’ box of the

setting you want to delete, then click ‘Delete’ button. (You can

select more than one setting).

Delete All If you want to delete all settings listed here, please click ‘Delete

All’ button.