User`s manual

3
1. Insert the TV card into an available PCI slot on your computer.
2. Connect the coaxial cable for the TV antenna/cable to the TV port of the TV card.
3. Connect one end of the A/V converter cable to the A/V port of the TV card, and connect
the Composite (or S-Video input), and audio inputs to the corresponding output cables
of your video/audio source.
4. Connect one end of the provided Audio Cable to the Audio Out connector of the A/V
converter cable, and connect the other end of the Audio Cable to the Line In port of
your sound card.
5. Connect the FM Radio Antenna to the FM port of the TV card.
6. Connect the Remote Sensor to the Remote port of the TV card.
7. Connect your speakers to the Audio Out/Line Out port of your sound card.
CHAPTER 2 INSTALLING VISION+ TV CARD DRIVER
Before installation, it is highly recommended that all background applications such as
antivirus software and system monitoring programs be disabled first.
1. Turn on your computer. The Found New Hardware Wizard will appear. Click Cancel to
quit the wizard and insert the provided Installation CD-ROM.
2. The setup menu will automatically appear. Select Driver_Install to start the driver
installation.
Note: If the setup menu does not appear automatically, go to Start, Run, and type
D:\ksetup.exe (where D is the letter of your CD-ROM drive) and click OK.