User`s manual

8. Click Finish to complete the driver installation.

9. Leave your computer powered on and proceed to the next section, Hardware Installation.

1.4 Hardware Installation

After you have updated the USB 2.0 host controller driver to the latest version, you can

install the Vision+ TV box. Please refer to the diagram below as you follow the installation

procedures.

Note: Be sure to follow the steps carefully and plug in the USB 2.0 connector last.

1. Connect the coaxial cable for the TV antenna/cable to the TV port of the TV box.

2. Connect the S-Video cable from you video source to the S-Video port of the TV box. If

you don’t have an S-Video cable, use the provided Composite to S-Video converter

cable.

3. Connect the audio cable from your audio source to the AUD-IN port of the TV box.

4. Connect one end of the provided Audio Cable to the AUD-OUT port of the TV box and