User manual MyiHome AirLinkWiFi Smurf A Series H.264 Internet Wireless Camera NIGHT VISION & REMOTE PAN/TILT ROTATE User Manual Version 2.
User manual Application 1)"Baby monitor" Sweet BabyiCare *Watch, Sing, Talk & Hear baby * Anywhere & Anytime in the world Warning: All parents and caregivers to put at least 3 feet between any video or audio baby monitor cords and a child in a crib 2) Security MyiHome Real Time Security & Control anytime anywhere 3) Health Care 4) Pet care 5) Farm care Important Safeguards and Warnings >Environment：Please place and use IP camera under temperature between-10~60 degree and humidity less than 90%；Do not use
User manual 1 Introduction 1.1 Packing List When you receive internet wireless camera, Firstly, check model item on product is the same as what you ordered； Untie the packing and checking the items contained against the following list; Wireless IP Camera 1 Wi-Fi Antenna(If support in wireless) 1 DC Power Supply 1 CD 1 Network Cable 1 Mounting bracket 1 NOTE: Contact us immediately in the case of any damaged or short of contents. 1.
User manual Power: Outdoor Output (+12V2A) 1.3 PC System Requirements System configuration requirements :( Example for view four IP Camera) CPU: 2.06GHZ or above Memory: 256M or above Network Card: 10M or above Display Card: 64M or above memory Recommendable Operating system: Window2000 or Window XP or Vista 1.4 Hardware Instruction Follow the steps below to set up your camera hardware.
User manual CAUTION: Make sure to only use the power adapter supplied with IP Camera. Using a non-approved power adapter may damage the camera. 3) The camera takes approximately 30 seconds to start up. 4) When the camera is powered and network cable plug correctly. Its head will turn around and the Network Indicator LED is blank.
User manual Software installation is the key to the successful use of this product. 1 Open the CD, find the software as instruction; 2 Double click AirLink CMS setup.exe and install the software as instruction. Default IP address ： 192.168.1.10 ， subnet mask ： 255.255.255.0 ， gateway：192.168.1.1 default login: “admin” and password blank For safety sake, when firstly log-in, please go to “Account” to modify user name and password 3.1 CMS Instructions in Local network Click CMS icon -> 3.
User manual 3.4 Zone List -> IP address is your local AP DHCP Client Range: For Example: Your AP Router IP address is 192.168.1.1, the DHCP range you can give at 192.168.1.200 3.
User manual Please note: User Name default is admin, no Password; Port number should set at “34567” Click IP address from top list Click ->Add Device -> OK as below image 3.6 Device Monitor 3.6.1 End a list showed Devices Connect Successful 3.6.2 Monitor can be viewing maximum 64 channels 3.6.
User manual 3.7 Record 3.7.1 Recording Storage setting ->Click -> Auto storage list as below image choose what you wish 3.7.
User manual schedule 3.7.2 Select cameras list from left side ->Click from Plan Template list add schedule 3.7.
User manual Device add “By Name” or “By Time” at left side ->Search -> Auto Recording files appear in a list 【Playback control button】see detail in below chart； 3.8 Remote Configure 3.8.
User manual User and Password: the user name and password used when applying for the domain name or use free myihome.org login account and password at each MyiHomeAirLink camera base paste up with a label Apply DDNS “myihome.org” as below image 3.8.2 WiFi Setting 3.8.3 Remote viewing how to set up from your AP Router 3.8.3.1 Give DHCP Client Range suggest setting at 192.168.1.
User manual 3.8.3.2 Enable “UPNP” from TCP/IP Setting 3.8.3.
User manual 3.8.3.
User manual 3.9 Remote Viewing via 3G Smart Phone 3.9.1 Search from iPhone / iPad Apple APP Store: “AirLink WiFi Networking Corp.” or “MyiHome AirLinkWiFi.H.264” Process: Device Name: any word you like Address: 012059035.myihome.org (according to each IP camera myihome.org user account or you can use static IP address) Port: 34599 by fixed. User ID: default is “admin” Password: default is blank Max Channel: 1 (for camera 1, channel 2 for camera 2) 3.10 Remote control CMS 3.10.1 Click -> 3.10.
User manual Main menu guideline Main Menu Submenu Function summary Record Record Set record config, record type, record period, etc.
User manual Snapshot Set snapshot period, type , etc. Set motion detect alarm channel, sensitivity, Video motion area, linkage parameters: alarm output, snapshot, recording, PTZ, email sending, ftp upload, etc. Set video blind alarm channel, sensitivity, linkage Video blind parameters, alarm output, snapshot, recording, PTZ, email sending and ftp upload, etc.
User manual Set basic net parameter, and DHCP 、 DNS Network parameter ， auto-gain IP address, network high-speed download, net transmission tactics ARSP、Mobile monitor、UPNP、FTP、WiFi、3G、 Net service alarm center 、 RTSP 、 PPPOE 、 NTP 、 Email 、 IP authority、DDNS parameter, etc.
User manual Restore setting status of : regular, encode, Default record, alarm, network, net service, GUI display, serial settings, account manage Import & Export Upgrade Reboot HDD info Info Log Version Config import, Config export, Log export To do net upgrade via IE or client software IPC soft reboot Show ttl space of HDD, type, space left, record time, etc Can base on record type and time to search log, can clear the log information Show alarm input output, system version, build date, etc Camera
