User guide

7. Command Line Interface
AirLive A.DUO User’s Manual
142
show firmware version
show vlan ssid list
show wds settings
show advanced wireless
show syslogd
 show antenna
 Purpose: Check antenna polarization
 Example:
Command> show antenna
Antenna setting is Vertical;
 show ratemode
 Purpose: Show whether the A.DUO is using 20MHz channel width
 Example:
Command> show ratemode
Ratemode is Full (20Mhz);
 show noise immunity
 Purpose: Show the noise immunity setting
 Example:
Command> show noise immunity
Noise immunity is enable