User guide

3. Configuring the AirMax5X

AirLive AirMax5X User’s Manual

In this chapter, we will explain AirMax5X’s available management interfaces and how to get

into them. Then, we will provide the introduction on Web Management and recommended

initial settings. For detail explanations on Web Management functions, please go to

Chapter 4 and 5.

3.1 Important Information

The following information will help you to get start quickly. However, we recommend you to

read through the entire manual before you start. Please note the password and SSID are

case sensitive.

 The default IP address is: 192.168.1.1 Subnet Mask: 255.255.255.0

 The default user’s name is: admin

 The default password is: airlive

 The default wireless mode is : Access Point mode

 After power on, please wait for 2 minutes for AirMax5X to finish boot up

 Please remember to click on “Apply” for new settings to take effect

3.2 Prepare your PC

The AirMax5X can be managed remotely by a PC through either the wired or wireless

network. The default IP address of the AirMax5X is 192.168.1.1 with a subnet mask of

255.255.255.0. This means the IP address of the PC should be in the range of 192.168.1.2

to 192.168.1.254.

To prepare your PC for management with the AirMax5X, please do the following:

1. Connect your PC directly to the LAN port on the DC Injector of AirMax5X

2. Set your PC’s IP address manually to 192.168.1.100 (or other address in the same

subnet)

3. Configuring the

AirMax5X