Owner's manual

7. Video Settings
AirLive BC-5010/BC-5010-IVS User’s Manual 32
7.1 Video Profile
1. ROI: ROI means Region of Interest. When the main stream is set to High Resolution,
user can select specified region for monitoring, for this will saving the bandwidth if there are
too many collision on the network.
2. Main Stream & Second Stream: To adjust the camera to capture images in several
resolutions (up to 2592 x 1920 @ 15fps) in H.264, MPEG4, or MJEPG format.
- Video Resolution: Select the desired resolution that you can view on PC from the
Video Resolution pull-down menu: up to 2592 x 1960 if High Resolution is selected.
You also need to select a proper setting of Frame Rate.
Please note that higher settings in video resolution and Frame Rate obtain better
video quality while it uses more resource within your network.
- Rate Control: Set the proper image quality by selecting Video Quality or Bitrate, and
then select the desired settings from the pull-down menu:
z Video Quality: Select Very Low, Low, Normal, High, or Very High from the
pull-down menu.
z Bitrate: Set a proper value (in kbps) depending on your network status.
3. Mobile View (Not supported by MPEG4): The camera supports 3GPP specification.
Select the Disable option to disable this feature. Otherwise, select 3GPP Without Audio
or 3GPP With Audio to transfer the video clips without or with audio.
If you use a mobile phone that supports 3GPP, you can also view the real-time streaming
image captured by the camera on your phone (with the default player on the phone) by
entering the RTSP link:
rtsp://(IP address of the camera)/3gp
NOTE. Your mobile phone and the service provider must support 3GPP function. Please
contact your service provider when you are failed to use this service.
7.2 Exposure
1. Exposure Setting: There are two options (Auto and Manual) to select. When you select
Manual mode, you can adjust Exposure Value, Exposure Time and Gain settings of the day
and night mode.