User Manual

AirLive Ether-FSH2402NT User’s Manual

9 LED Indicators

Refer to the next chapter Understanding LED Indicators for

detailed information on the meaning of each LED indicator.

9 10/100BASE-TX Twisted-Pair Ports (Port1~24)

These ports supports network speeds of either 10Mbps or

100Mbps, and can operate in half- and full- duplex transfer

modes. These ports also supports automatic MDI/MDI-X

crossover detection function gives true “plug and play” capability,

just need to plug-in the network cable to the hub directly and no

need to care if the end node is NIC (Network Interface Card) or

switches and hubs.

9 1000BASE-T Twisted Pair Ports (Port 25~26)

The Switch is equipped with two Gigabit twisted pair ports,

supported auto negotiable 10/100/1000Mbps and auto

MDI/MDIX crossover detection function. These two ports can

operate in half- and full- duplex modes.

Rear Panel

Figure 5. The rear panel of the Switch

9 AC Power Connector

This is a three-pronged connector that supports the power cord.

Plug in the female connector of the provided power cord into this

connector, and the male into a power outlet. Supported input

voltages range from 100-240V AC at 50-60Hz.