User guide

4. Administrating the Device
AirLive FE-200CU Manual 34
z UPnP:
Enable UPnP, so that the device can be discovered in an UPnP Compliant Network.
z NAT Traversal:
Enable NAT traversal, so that the client from Internet can have access to the devices
behind the Router.
4.5.3 SMTP (Setup E-Mail Configuration)
Note: With UPnP enabled, the IP Sharing device (Router) capable of UPnP function will
automatically be noticed with the device’s NAT port.
Configure an email host in the device that will send an email on behalf of the configured
email account in a circumstance, like sending an email notice to a specified mail address
(Event Configuration). Complete the Mail Server, Server Port, Authentication information
(if required) and the sender email address.
4.5.4 DDNS (Dynamic DNS)
Dynamic DNS configuration. The network device can be assigned with a host name by
registering this service (Internet access required).
z Host Name:
Assigned name that will be used for access to the device
z User Name/Password:
Account authentication for logging to this service.
z Update Time:
Periodically, the device updates its access info to sever in the configured time.
z Response:
The device responds the connection info.