User`s manual

4. Administrating the Device
AirLive FE-200CU Manual 31
4.3.3 I/O Ports
AirLive FE-200CU supports 1 photo-coupled relay inputs and 1 relay outputs. Refer to
“Appendix A: I/O Terminal Connectors” for detail pin description and application. The
below table shows the status of the external trigger/alarm devices.
4.3.4 Event Configuration
1. To add an event trigger, click on “Add” and the setup panel will be expanded.
2. Give a name to this event.
3. Set the time interval between each trigger.
4. Set the time period for the trigger. Choose “Always” or “During time between” or “Never”.