User`s manual

4. Administrating the Device
AirLive FE-200CU Manual 39
z Reboot:
The device is restarted without changing any of the network settings. I t means the IP
address of the device will not change after firmware upgrade.
z Load Default (Excluding Network setting):
The unit is restarted and most current settings are reset to factory default values.
This action will not reset the network setting.
z Factory Default (Including Network setting):
Recall the device hard factory default settings. Note that click this button will reset all
device’s parameters to the factory settings (including the IP address).
z Firmware Upgrade:
The device supports new firmware upgrade (the software that controls the operation in
the device). Please contact your dealer for the latest version if necessary.
Download the latest firmware file from our website or your dealer. Unzip this
firmware file to binary file and store it into your PC. Then follow the steps as bellows
carefully: