User`s manual

4. Administrating the Device

AirLive FE-200VD Manual

4.5.2 Advanced

Enable or configure other network functions.

z NTP:

Configure a NTP (Network Time Protocol) server, so that the device system date and

time can be synchronized with a specified Time Server or DHCP server.

z HTTP:

Set the HTTP port that will be applied for Web UI access.

z RTSP:

Set the RTSP (Video) port for video data transmission.

z UPnP:

Enable UPnP, so that the device can be discovered in an UPnP Compliant Network.

z NAT Traversal:

Enable NAT traversal, so that the client from Internet can have access to the devices

behind the Router.

4.5.3 SMTP (Setup E-Mail Configuration)

Note: with UPnP enabled, the IP Sharing device (Router) capable of UPnP function will

automatically be noticed with the device’s NAT port.

Configure an email host in the device that will send an email on behalf of the configured

email account in a circumstance like sending an email notice to a specified mail address

(Event Configuration). Complete the Mail Server, Server Port, Authentication information

(if required) and the sender email address.