User`s manual

5. Appendix
AirLive FE-200VD Manual
52
Motion Detection
Up to 10 motion detection areas with included or excluded
options
Alarm Events
File upload via FTP ,SD Card or email
Notification via email, HTTP,
External output activation
General
RAM
128MB
ROM
2GB
Power Supply
12V DC external power adapter
PoE
IEEE 802.3af
Power Consumption
5W
IP Level
IP66
Vandal proof
Yes
Connectors
1 x RJ-45 10BaseT/100BaseTX
1 x DC power jack
1 x Terminal Connector
1 x Audio Line out and 1 x Audio Line in
1x Micro SD Slot
1 x DI and 1 x DO
Indication LED
Green and orange LEDs
Mechanical IR-cut
Yes
Operating Temperature
-10°C to 50°C (14°F to 122°F)
Operating Humidity
20% ~ 80% (non-condensing)
Dimension
HxWxD:180x180x55 (φ)mm
Viewing System
OS
Windows® XP, Vista, 7
Browser
IE 6.0 or later, Firefox 2.0 or later, Safari
Cell Phone
With 3GPP player
Video Player
VLC, Quick Time, Real Player, Core Player
Software
Search & Installation
IPWizard II
Bundled NVR Program
CamPro Express 64, CamPro Professional
Appendix F: Configure Port Forwarding Manually
The device can be used with a router. If the device wants to be accessed from the WAN,
its IP address needs to be setup as fixed IP address, also the port forwarding or Virtual
Server function of router needs to be setup. This device supports UPnP traversal function.
Therefore, user could use this feature to configure port forwarding of NAT router first.
However, if user needs to configure port forwarding manually, please follow the steps as
below: