User`s manual
3.2 Interface IP
Step1. In System Æ Interface IP, enter the following setting:
Enter the available IP of the LAN subnet in IP Address, Netmask and Default
Gateway column.
Enter DNS server 1 or DNS server 2.
If necessary, select to enable VLAN feature and provide the VLAN ID based on the
setting.
Enter Max Downstream Bandwidth and Max Upstream Bandwidth.
(It depends on the applied flow statistics of the user.)
Enable the setting of Ping, HTTP and HTTPS function.
Click OK. (Figure 3-3)
Figure 3-3 The interface IP setting
Please do not cancel HTTP and HTTPS before setting the Interface IP, because it will let the
system administrator could not enter the WebUI of IAR-5000.
18