Manual

5. Ensure your TCP/IP settings are correct.
Using DHCP
To use DHCP, select the radio button Obtain an IP Address automatically. This is the default Windows
setting, and it is recommended to use it. By default, the IP-2000VPN will act as a DHCP Server.
Restart your PC to ensure it obtains an IP Address from the IP-2000VPN.
Using a fixed IP Address ("Use the following IP Address")
If your PC is already configured, check with your network administrator before making the following changes.
• In the Default Gateway field, enter the IP-2000VPN’s IP address and click OK. Your LAN
administrator can advise you of the IP Address they assigned to the IP-2000VPN.
• If the DNS Server fields are empty, select Use the following DNS server addresses, and enter the
DNS address or addresses provided by your ISP, then click OK.
Macintosh Clients
From your Macintosh, you can access the Internet via the IP-2000VPN. The procedure is as follows.
1. Open the TCP/IP Control Panel.
2. Select Ethernet from the Connect via pop-up menu.
3. Select Using DHCP Server from the Configure pop-up menu. The DHCP Client ID field can be left
blank.
AirLive IP-2000VPN User’s Manual
167