Manual

AirLive IP-2000VPN User’s Manual

Data – Virtual Servers Screen

Servers

This lists a number of pre-defined Servers, plus any Servers you have defined.

Details of the selected Server are shown in the "Properties" area.

Properties

Enable

Use this to Enable or Disable support for this Server, as required.

• If Enabled, any incoming connections will be forwarded to the selected PC.

• If Disabled, any incoming connection attempts will be blocked.

PC (Server)

Select the PC for this Server. The PC must be running the appropriate Server

software.

Defining your own Virtual Servers

If the type of Server you wish to use is not listed on the Virtual Servers screen, you can use the Firewall

Rules to allow particular incoming traffic and forward it to a specified PC (Server).

Connecting to the Virtual Servers

Once configured, anyone on the Internet can connect to your Virtual Servers. They must use the Internet IP

Address (the IP Address allocated to you by your ISP).

e.g.

http://203.70.212.52

ftp://203.70.212.52

It is more convenient if you are using a Fixed IP Address from your ISP, rather than Dynamic. However, you

can use the Dynamic DNS feature, described in the following section, to allow users to connect to your Virtual

Servers using a URL, rather than an IP Address.