Manual

ESP SPI This is required if either ESP Encryption or ESP Authentication is enabled.
• Each SPI (Security Parameter Index) must be unique.
• The "in" SPI here must match the "out" SPI on the remote VPN, and the "out"
SPI here must match the "in" SPI on the remote VPN.
• Each SPI should be at least 3 characters.
For Manual Key Exchange, configuration is now complete.
• Click "Next" to view the final screen.
• On the final screen, click "Finish" to save your settings, then "Close" to exit the Wizard.
IKE Phase 1
If you selected IKE, the following screen is displayed after the Traffic Selector screen. This screen sets the
parameters for the IKE SA.
AirLive IP-2000VPN User’s Manual
63