User Manual

ManualsBrandsAirLive ManualsMultimediaMU-7000AVs

MU-7000AV

3.5" Network Multimedia Player

User’s Manual

Summary of content (36 pages)

PAGE 1
MU-7000AV 3.
PAGE 2
Declaration of Conformity We, Manufacturer/Importer OvisLink Corp. 5F., NO.6, Lane 130, Min-Chuan Rd., Hsin-Tien City, Taipei County, Taiwan Declare that the product 3.
PAGE 3
MU-7000AV CE Declaration Statement Country cs Česky [Czech] Declaration OvisLink Corp. tímto prohlašuje, že tento MU7000AV je ve shodě se základními požadavky a dalšími příslušnými ustanoveními směrnice 1999/5/ES. da Undertegnede OvisLink Corp. erklærer herved, Dansk [Danish] at følgende udstyr MU-7000AVoverholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF. de Hiermit erklärt OvisLink Corp.
PAGE 4
MU-7000AV User’s Manual FCC COMPLIANCE STATEMENTS This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
PAGE 5
Table of Contents Table of Contents 1. Before You Get Started .......................................................................................................... 1 1.1 Safety Instructions........................................................................................................ 1 1.2 Preliminary Tools .......................................................................................................... 1 1.3 Take a look to the MU-7000AV ..............................................
PAGE 6
Table of Contents 6.2.2 NDAS Device Management..............................................................................17 6.3 NDAS Device Functions ............................................................................................. 18 6.3.1 NDAS Device Management..............................................................................18 6.3.2 Changing from Read/Write Mode to Read-Only Mode..................................19 6.3.3 Changing from Read Mode to Read/Write Mode .............
PAGE 7
1. Before You Get Started 1. Before You Get Started 1.1 Safety Instructions 1. Always unplug the power cord before inserting Hard Drive. 2. Using a power supply with a different voltage rating will damage the product and void its warranty. 3. Keep this equipment away from humidity or any type of moisture. 4. Do not drop or shack the device. 5. Do not press or put any weight on the device. 6. Do not clean the device with alcohol, thinner or benzene. 1.
PAGE 8
2. Easy Installation Guide 2. Easy Installation Guide 2.1 Package Contents MU-7000AV x 1 Power Adapter x 1、Power Adapter Cable x 1 Audio cable x 1、Video cable x 1 USB cable x 1、Ethernet Cable x 1 Remote control User Manual x 1、Software Installation CD x 1 2.2 Specifications Application：Any 3.5 inch hard disk (IDE interface) Output Port：Composite video（NTSC/PAL）、S-video（NTSC/PAL）、Stereo Audio jack 2.
PAGE 9
2. Easy Installation Guide // 3. Using MU-7000AV 2.6 Hardware Installation Step1 Step2 Step3 Step4 3. Using MU-7000AV 3.1 USB Enclosure 1. Connect the power cable then power on it (push the power button for 2~4 seconds). 2. Connect the USB cable to your computer. 3. When your hard disk is detected by your computer, LED1 is on. 3.1.1 USB OTB (One Touch Backup) 1. Install the Setup_v1.5.exe from OTB in the Software Install CD. 2. Setup the folder or partition you want to copy, and push the button.
PAGE 10
3. Using MU-7000AV 3.2 Media File Playback Mode 1. 2. 3. 4. 5. Please connect the Audio and Video cables between MU-7000AV and TV as shown in the figure below. Please plug in the power adaptor and power on your TV. Please change your TV mode to AV mode. Push the POWER button for 2~4 seconds. Now, you can enjoy it. ※ Note： If your image and subtitle are separated, please put them in the same folder and then copy to your MU-7000AV. Remember that the image and the subtitle must have the same filename. 3.2.
PAGE 11
3. Using MU-7000AV 3.3 LAN Share Device Setup Overview ( NDAS Mode ) 1. Connect the included Ethernet cable from the Ethernet port on LAN Share to a switch (100 Base-T). 2. Wireless users: Connect LAN Share to your wireless router or access point with included Ethernet cable. 3. Make sure the power connector is firmly attached to the LAN Share and connect the power adapter to a power source. 3.
PAGE 12
4. Remote Control Features 4. Remote Control Features Key pad OK UP DOWN LEFT RIGHT PHOTO MUSIC VIDEO FILE MAIN MENU SETUP Function Description Plays or executes the current selection. Moves the cursor up on the screen. Moves the cursor down on the screen. Moves the cursor left on the screen. Moves the cursor right on the screen. PHOTO Mode. MUSIC Mode. VIDEO Mode. FILE Mode. Go to the main menu. Setup and customize the settings of MU-7000AV. INFO See the information of the file.
PAGE 13
4. Remote Control Features PLAY/OK Takes you to play or execute the current selection. UP Direction button to move cursor on the screen. DOWN Direction button to move cursor on the screen. LEFT Direction button to move cursor on the screen. RIGHT Direction button to move cursor on the screen. MAIN MENU Takes you to the main menu.
PAGE 14
5. Starting Quick Media Play 5. Starting Quick Media Play To start Quick Media Play, do the followings： 1. Press ’Setup’ button to enter the SETUP MENU-MAIN PAGE. 2. Choose ’Preferences’ and check ’TV TYPE’ is ’MULTI SYSTEM’ or not 3. After setup, choose ’Exit Setup’ return to main menu. Notes： 1. Default setup of TV type is MULTI SYSTEM. 2. MULTI SYSTEM includes NTSC type and PAL type. 3. NTSC（Taiwan, US, Japan…etc） 4. PAL（Mainland China / European countries） 5.
PAGE 15
5. Starting Quick Media Play SLIDE SHOW SETUP Press ’Setup’ button to enter the SETUP MENU-MAIN PAGE and select SLIDESHOW SETUP for play-mode selection. MANUAL：You must press ’▲’ or ’▼’button to change your picture. AUTO：Pictures will change automatically. FOLDER REPEAT This item can setup folder repeat in slideshow. Press ’▲’ or ’▼’button on the remote control to select your play mode. ON：All photo files display automatically. OFF：Single photo file display automatically.
PAGE 16
5. Starting Quick Media Play FULL SCREEN：Change picture with full screen. TOP->BOTTOM：Change picture from top to bottom. BOTTOM->TOP：Change picture from bottom to top. T/B->CENTER：Change picture from top and bottom to center. CENTER->T/B：Change picture from center to top and bottom. BLIND:T->B：Change picture from top to bottom like blind. LEFT->RIGHT：Change picture from left to right. RIGHT->LEFT：Change picture from right to left. L/R->CENTER：Change picture from left and right to center.
PAGE 17
5. Starting Quick Media Play REPEAT PLAY Press ’Setup’ button to enter the SETUP MENU-MAIN PAGE and select MUSIC SETUP to select your play mode. You can press ’▲’ or ’▼’button on the remote control to select your play mode ONE：The same song will play repeatedly. OFF：Music will stop to play when songs played once from first to last. ALL：All songs will repeatedly play continued. 5.3 VIDEO PLAY MODE VIDEO mode allows you to view your video files.
PAGE 18
5. Starting Quick Media Play 5.4 FILE LIBRARY File library allows you to view all your media files and browse your play list. ● Use the arrow keys on your remote control to quick search the file you want to play. ● Press ’OK’ button on your remote control to play the file DELETE、RENAME、NEW FOLDER、CANCEL Press ’ INFO’ button on the remote control in the file library, you can delete、rename the file and folder, you also can create a new folder. DELETE：Delete file. RENAME：Create new file name of file.
PAGE 19
6. Network Hard Disk (AirLive NDAS Mode) 6. Network Hard Disk (AirLive NDAS Mode) 6.1 Use With NETDISK Mode in Windows System 6.1.1 Install LAN Share Device Management in Windows XP、Windows 2000 and Server 2003 1. Find NDAS control AP in the driver CD, double click setup.exe, than choose the language what you need 2. Install Shield Wizard will appear. Click the Next button to continue to next step. 3. Accept License Agreement and the click Next to continue installation. 4.
PAGE 20
6. Network Hard Disk (AirLive NDAS Mode) 7. If this is your first time installing LAN Share, Add New Hardware Wizard will appear. Click Next and follow further instructions. Otherwise, MU-7000AV will be listed as a local drive on My Computer. Driver letter and name may vary between Personal Computers. 8. Select Search for the best driver for your device. Click Next. 9. Select Specify a location and click Browse button. From the Browse for Folder window, search for NDASUSB folder and click OK.
PAGE 21
6. Network Hard Disk (AirLive NDAS Mode) 6. Checking NDAS Device status. 7. Select how you want to mount the NDAS Device Read/Write Mode: Mounts NDAS Device as Read/Write Mode. Read-Only Mode: Mounts NDAS Device as Read-Only Mode. Don’t Mount: NDAS Device is left in Connected (Unmounted) Mode. Note: Read/Write Mode will be disabled if a user did not enter the Write Key during step 5. 8. Registration is finished. Click Finish 6.1.5 Add / Register a New NDAS Device without using the Registration Wizard 1.
PAGE 22
6. Network Hard Disk (AirLive NDAS Mode) 2. If the Windows Logo Testing message comes up, click Yes or Continue Anyway to finish the installation. 3. Registration is completed. Click NDAS Device Management to see the registered NDAS Device Read/Write Mode Read-Only Mode Note: If you cannot see your NDAS Device, please click Refresh Status and check again. 4. Using NDAS Device Now that you have successfully installed NDAS Device, it’s time to familiarize yourself with using the NDAS Device.
PAGE 23
6. Network Hard Disk (AirLive NDAS Mode) NOTE : LAN Share is preformatted in NTFS. In order to use LAN Share in mixed environments, LAN Share must be formatted in FAT32. If you use the “Disk Management” utility in Windows XP、Windows 2000 or Server 2003 to format your LAN Share,, then your LAN Share will be re-formatted in NTFS. NTFS is not a compatible file system format with Mac and Windows 98SE; thus your computers on these OS will not recognize LAN Share.
PAGE 24
6. Network Hard Disk (AirLive NDAS Mode) 2. Register a New Device - Registers a NDAS Device to your computer. 3. Refresh Status - Updates status of your NDAS Device. 4. About - Displays NDAS Device software version information. Check for Updates：Check software update. 5. Options - Can customize NDAS Device Management features and error messages/ dialogs. 6. Exit - Exits NDAS Device Management. NDAS Device Management can be restored by double clicking the icon on the Desktop. 6.3 NDAS Device Functions 6.3.
PAGE 25
6. Network Hard Disk (AirLive NDAS Mode) Properties - Displays properties of the NDAS Device D. NDAS Device in Connected Mode Connected - The current state of NDAS Device. Mount (Read-Only) - NDAS Device can be mounted into Read-Only Mode. Mount (Read/Write) - NDAS Device can be mounted into Read/Write Mode. Unregister - Enables users to un-register NDAS Device. Properties - Displays properties of the NDAS Device. E. NDAS Device in Deactivated Mode Deactivated - The current state of NDAS Device.
PAGE 26
6. Network Hard Disk (AirLive NDAS Mode) The Green Square will change to a White Square indicating Connected Mode. and select the NDAS Device you have just umounted. 4. Click NDAS Device Management 5. Select Mount (Read/Write). The White Square will change to a Blue Square indicating Read/Write Mode. 6.4 Use With LAN Share Mode in Mac OS X 6.4.1 Install NDAS Device Management 1. Authenticate Enter Admin Name and Password. Then click OK. 2. Welcome to the Lan Share Installer Click Continue. 3.
PAGE 27
6. Network Hard Disk (AirLive NDAS Mode) Status Window Displays current status of NDAS Device. 6.4.4 Using NDAS Device Now that you have successfully installed NDAS Device, it’s time to familiarize yourself on using it. NDAS Device can be found on the desktop. Here are few uses for NDAS Device： - You can use NDAS Device like any other hard drive on your system. - Drag and drop files into NDAS Device. - Copy and paste data to NDAS Device. - Make and delete folders. - Share files and folders.
PAGE 28
6. Network Hard Disk (AirLive NDAS Mode) 6.5 NDAS Bind Management Using NDAS Bind Management users can create and manage a NDAS RAID. There are 3 different buttons in the NDAS Bind Management window. - Bind: Used for Aggregation, RAID 0, and RAID 1. - Unbind: Used to Unbind your Bound NDAS Devices. - Refresh: Used to refresh status of your NDAS Devices. 6.5.1 Bind There are three ways to bind：Aggregation、RAID0 and RAID1.
PAGE 29
6. Network Hard Disk (AirLive NDAS Mode) 5. Move a NDAS Device from the left window to the right window by first selecting a NDAS Device from the left window and then clicking the 'Add' button. 6. Repeat the above step for the rest for the NDAS Device you want to Bind and click Finish. 7. Two warning messages will appear. - Once NDAS Devices are bound, all of the data will be lost. Click Yes to continue. - The new bound NDAS Devices must be mounted and formatted before it can be used. Click Finish.
PAGE 30
6. Network Hard Disk (AirLive NDAS Mode) 5. Unbind window will appear. Make sure these NDAS Devices are ones that needs to be unbound and click Yes 6. Two warning messages will appear. - Once NDAS Devices are bound, all of the data will be last. Click Yes to continue. - The new bound NDAS Devices must be mounted and formatted before it can be used. Click OK. 7. Now you can go back into the NDAS Device Management and Mount each of unbound NDAS Device. 8.
PAGE 31
6. Network Hard Disk (AirLive NDAS Mode) 6.6 Other NDAS Bind Management Functions The NDAS 3.11 Bind Management software also comes with new added features such as - Add Mirror - Migrate - Replace Device - Replace HDD - Add Spare Disk - Remove Spare Disk 6.6.1 Add Mirror Adds a mirrored disk to a basic disk by adding a empty disk to a original disk which is in use, you can build a RAID 1 which contains data of original disk. 1. Right click on the Disk you wish to Mirror, Click Add Mirror. 2.
PAGE 32
6. Network Hard Disk (AirLive NDAS Mode) 2. Choose the Spare Disk and click OK. 3. Spare successfully added Note：If using a larger capacity drive to add to the mirror, the larger capacity will be matched to the size of the existing mirrored drives. 6.6.6 Remove Spare Disk Removes a spare disk from the fault tolerant RAID disk group. 1. Right click, select Remove Share Disk. 2. Choose the Removed Disk and click OK. 6.6.7 Using Mirrored NDAS Devices NDAS Driver 3.
PAGE 33
6. Network Hard Disk (AirLive NDAS Mode) 1. We recommend all users sharing the Mirrored NDAS devices upgrade their driver to 3.11. 2. Migrate only needs to be done on one computer in the network. 3. Once the Mirror NDAS device have been Migrated all other users with 3.11 can mount the drives. 6.7 Formatting NDAS Device When formatting NDAS device all other users must be unmounted. 6.7.1 Initialize NDAS Device 1. Right click My Computer and select Manage. 2. Computer Management window will appear.
PAGE 34
6. Network Hard Disk (AirLive NDAS Mode) 6.8 Uninstall Before you can uninstall a NDAS Device, you must close all applications using the NDAS Device. NDAS Disk Management, NDAS Bind Management, Windows Explorer and Internet Explorer must also be closed. 1. Close NDAS Disk Management by selecting Exit. 2. Uninstall NDAS Device. - Go to Start > Programs > NDAS Software > Uninstall NDAS Software - Windows Installer will appear. Click Yes if you want to continue. Otherwise click No.
PAGE 35
6. Network Hard Disk ( AirLive NDAS Mode ) 7. FAQ Media File Playback 1. I can see files when connected with the computer but can't see them on the TV？ A：MU-7000AV can only recognize FAT32 partitions. If the hard drive is partitioned using NTFS, No files can be displayed on the TV. 2. I Cannot format the hard drive larger than 32 GB (FAT32) using Disk Management under Windows XP？ A：That is the limitation by design of WinXP. You need an additional formating utility to do the format for you.
PAGE 36
7. FAQ sure that all computers have the same exact version of NDAS software installed. 5. Why can’t my computer go into hibernation or standby？ You must have customer select the Allow suspend/hibernation box from the Options menu in NDAS Device Management. 6. When I try to copy something to my NDAS, why does the following show up: “Cannot copy NDAS Administrator: The disk is write-protected. Remove the write-protection or use another disk.”？ You do not have Read/Write access.