User Manual

3. Using MU-7000AV
3.3 LAN Share Device Setup Overview ( NDAS Mode )
1. Connect the included Ethernet cable from the Ethernet port on LAN Share to a switch (100 Base-T).
2. Wireless users: Connect LAN Share to your wireless router or access point with included Ethernet cable.
3. Make sure the power connector is firmly attached to the LAN Share and connect the power adapter to
a power source.
3.4 Switching between TV Mode and NDAS mode
Push the “Power” button on the MU-7000AV or the remote control, then the LED will light up between “MP4”
and “NET HDD“. When the “MP4” LED is on, Media File Playback mode is active. When the
“NET HDD” LED is on, NDAS mode is active.
5
AirLive MU-7000AV User’s Manual